Upgrading a Transom with Nida Core
Boat in need of transom repair Remove the old rotten plywood core Install new Nida Core using 945…
Duratec Primer Product Application Instructions from Hawkeye Industries
Duratec Primer is a high build polyester coating used for refinishing fiberglass parts which require sanding and fairing work. SAVES…
Vacuum Bagging
Vacuum Bagging, as it suggests, is the process of utilizing a bagging apparatus and a vacuum to apply pressure on…
Vacuum Resin Infusion
VRI is a process by which you can produce consistent, high quality (good reinforcement to resin ratios) laminates, as well…
Basic Mold Construction
Prepare the Plug for the mold Wax the plug with a mold release wax (LBI TR-104). 6-8 coats are necessary,…
Application Guide: 555 VINYLESTER GLASS FLAKE BARRIER COAT
Actual coverage is about 35 sq. ft. per gallon at a thickness of 35 mils. Roller applications yield approx. 10…
ROLL & TIP GUIDE FOR THE APPLICATION OF URETHANE PAINT
This is a basic guide intended to convey the key points for refinishing old Gelcoat on fiberglass boats, RV’s, and…
Gelcoat Application Guidelines
As a Rule of Thumb: For One Quart (32 oz) of Resin: MEKP % cc Teaspoons fl oz 0.50 5…
309 Gelcoat Plus (Cures Tack Free)
309 GELCOAT PLUS is an “air dry” gelcoat used for re-gelcoating, refinishing or as a finish coating over a polyester…
Gelcoat Application Guide For a Mold
304, 306, 307, 308 GELCOATS ARE DESIGNED FOR USE IN A MOLD AND WILL NOT CURE “TACK FREE.” In a…