800-231-6537
239-G    Gallon....$   59.00
Hardner for R015
Vinylester Resin for Infusion
This resin in non thixotropic, low viscosity, VRI resin designed for low exotherm cure (100 cps). 
Excellent strength and toughness. 
R015-G       Gallon......$ 61.10
R015-5G   5 Gallon.....$233.25
239-2      2oz........$    2.70
239-8      8oz........$    3.00
VP10-90H         Each....$   82.95

EnkaFusion® 
VRIM - Vacuum Resin Infusion Molding
RTM - Resin Transfer Molding

EnkaFusion Flow Medium Type CX-1000 consists of a nonwoven polyester filter jacket and a three-dimensional "V"
shaped polyester core.  The unique "V" shaped structure creates an open channel for resins to race through while
maintaining high compression resistance under load. 
The filter jacket edges are ultrasonically welded — forming a
tight envelope around the “V” shape
core. This product is designed for use in Infusion, Resin Transfer Molding (RTM)
and Vacuum Assisted Resin Transfer Molding
(VARTM.)

   
• Creates a flow channel for resin
    • Flexible
    • Polyester core incased within a polyester fabric
PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE


VACUUM BAGGING & RESIN INFUSION



BAG FILM
 60" Wide.  Create air tight bag with 3 mil.
                                                                    
PEEL PLY
 60" Wide.  Use as lst layer of vacuum-bagging.


1202-1     1 yd...................$     4.40
1202-3     3 yd...................$     8.40



1202-10   10 yd.................$     22.55

1202-5     5 yd...................$    13.60

CALL

1202-R    330 yd $8.90/yd..$ 2,937.00
BREATHER FABRIC
1200-R    300 yd  $4.55/yd...$1365.00
1200-3     3 yd......................$  22.40
1200-1     1 yd......................$   8.60
1200-5     5 yd......................$  32.30
1200-10   10 yd....................$  56.70
Vacuum bagging is an excellent way of producing thin strong laminates. 

                                                                                    
MASTIC TAPE 

Double sided for sealing
bag system.

1201-1     1 yd......................$   7.90

1201-3     3 yd.....................$  16.00


1201-5     5 yd.....................$  29.90
CALL
CALL
CALL

Heavy blanket for absorbing excess resin.


1201-10   10 yd....................$  52.30
1201-R    100 yd  $4.20/yd...$ 420.00














 
VP10-90H-K      Kit........$ 189.00






CX-1000-10       10'.......$   6.95

CX-1000-50       50'.......$  19.35
CX-1000-100    100'......$  31.00

CX-1000-R        656'.....$ 169.65





sales@lbifiberglass.com











Kit Includes:
       ·
 Venturi Vacuum Pump  VP10-90H
       · Air Fittings (2)
       · Vacuum Cups (3) 
       · Tubing (10’)
       · Vacuum Gauge (1)
       · Mastic Tape (30’)
       · 12 sq ft of each:

                  Breather Fabric

                  Peel Ply

                  Bagging Film

 











































 















SM5229C32   Case of 32.....$  139.65
Vacuum Venturi Kit
A transducer produces a vacuum by forcing compressed air through a limiting orifice into a venture section.  
As the air exits the orifice, it expands, increasing the velocity to supersonic speeds before entering the Venturi section.  This creates a vacuum, or negative pressure, at the vacuum inlet port, located between the orifice and
the Venturi section.  This high velocity insures efficient and effective operation effective operation.

   
The Venturi can be purchased separately. 
  
Requires an air compressor producing 1.8 cfm @ 80 psi.  Call for specific Technical Information.