800-231-6537

Tools & Equipment

FIBERGLASS AIR CHOPPER
* An industrial quality tool.
* Converts low-cost, continuous strand roving into chopped glass for laminating.
* Safe and easy to operate.
* Speed control for large and small output.
* Practical for large work in large shops because of high glass output.
* Practical for small work shops because of compact size and controlled output.
* Replacement parts available.

ES-C93-A Air Chopper...........................$ 355.00

CORDLESS FIBERGLASS CUTTER
* Industrial strength.
* Rechargeable 9.6v long life Nickle Cad Battery.
* Self shapening 10 sided HSS Blade
* Built in sharpening stone included.
* Adjustable opening up to 5/8" (14mm)
* Perfect for heavy glass fiber or multi layers.
* Cuts marine carpet with ease.
* Includes battery and charger base.

ES-100........$ 153.70

ES-C93-AG Gear Reduced Air Chopper....$ 500.00

MODEL 100 CUP GUN
· Spray material contained in throw away paper cup.
· Easy to clean solid brass nozzle- 3/16".
· Easy to clean solid cast aluminum cup lid.
· Built-in air volume control.
· Nine different nozzle sizes available to fit every job.
· Operated from low volume air source.
· A must for every fiberglass and cultured marble shop.
· Can be used for spraying gelcoat, resin, and parting
film and for sand blasting.

MODEL 200 SUPER GUN
· Easy to clean gun.
· Disposable paper cups.
· Solid aluminum cup lid.
· Graduated catalyst cup.
· Individual control of material and catalyst.
· Instant change-over to other materals.
· No pre-mixing of catalyst with materials.
· Nine different nozzles available to suit any material; includes one 3/16" nozzle.
· Chemical resistant catalyst fluid nozzle assembly.
· Can be used for spraying gelcoat and wet coats of resin and for sandblasting.
· Change instantly from mold release to different colors of gelcoat.

ES-200........$ 280.90

ES-MB60-115V........$ 375.00

3.5" ELECTRIC FIBERGLASS CUTTER
* Heavy duty cutter for heavy weight fiberglass 3.5" (90mm) 6 sided blade.
* .95" (24mm) capacity.
* 1/5 hp (180w) motor (115v).
* 2 wheels on base plate for easy table top cutting.
* Adjustable guard to limit blade exposure.
* Mounted sharpening stone.

MODEL G830
GRAVITY FEED DETAILING GELCOAT SPRAY GUN
Faultless pinpoint accuracy in a miniature HVLP, touch-up spray gun, combining superb automation
& effortless maintenance with minimum air consumption. 2.0mm nozzle is perfect for most gelcoats.

* High transfer efficiency & high quality spray pattern.
* Fast working speed to save time and gelcoat.
* Wide fan pattern due to low pressure.
* Includes a mini regulator & .25 liter cup.
* Complete with 2.0mm nozzle.

ES-MB-90C-115V........$ 408.00

4.25" ELECTRIC FIBERGLASS CUTTER
* Heavy duty cutter for heavy weight fiberglass.
* 4.25" (110mm) 4 sided HSS blade.
* 1.25" (32mm) capacity.
* 1/4 hp (180w) motor (110v)
* 4 wheels on base plate for easy table top cutting.
* Adjustable guard to limit blade exposure.
* Mounted sharpening stone.

ES-MB-110........$ 480.00

EB-4325B50 Sleeve 50.....$ 35.00

EB-4325 Each............$ .85

EB-4325B500 Case 500......$ 267.00

DISCOUNT: LESS 10% IN CASE LOTS

GRADUATED HEAVY DUTY PLASTIC CUP & LINER BAGS FOR MODEL 100 & 200 GELCOAT GUN
- G300-011HD: Graduated cut for accurate measuring.
- G300-011BAG:Disposable bags fit inside cup, reduces
clean up time.

ES-G300-011HD..............................$ 2.25

ES-G830........$ 74.15

SPRAY GUN NOZZLES FOR MODEL 100 & 200 CUP GUNS
All fluid nozzles include one o-ring.

Gun Supplies

DISPOSABLE PAPER CUPS
· 32 oz. Capacity. Non-coated interior.
· Designed to fit spray gun models 100 and 200
· Many shop uses. 500 cups per case.

ES-FN1 1/32"........$ 13.80

ES-FN2 1/16"........$ 13.80

ES-FN3 3/32"........$ 13.80

ES-FN4 1/8"..........$ 13.80

ES-FN5 5/32"........$ 13.80

ES-FN6 3/16"........$ 13.80

ES-FN7 7/32"........$ 13.80

ES-FN8 1/4"..........$ 13.80

ES-FN9 9/32"........$ 13.80

DISCOUNT: LESS 5% IN LOTS OF 5; LESS 10% IN LOTS OF 10

ES-G300-011BAG Pack of 100.....$ 15.50

O-RING REBUILD KITS

ES-CLG-026...........$ 15.55

DRUM MIXER / AGITATOR
¾” drum agitator fits into ¾” NPT hole in standard drums. Allows for uniform agitation of Low to Medium

Viscosity Liquids suspensions and thixotropic liquids while pumping simultaneously through 2” opening.

    · ¾ hp American made Gast air motor.

    · Unique stainless ¾” threads & 32” shaft for long life.

    · Delrin resin block to keep motor free from contamination.

    · Graduated 3/8” npt needle valve.

     · Maximum air consumption - 25 CFM.

DISPOSABLE FILTER
· Easy to read Graduated cylinder.
· Anodized aluminum w/steel lock for repeat measurements.
· Comfortable fit.
· CNC machined accuracy.
· Stainless measuring pin.
· Over 1" of travel/measurements.

SPRAY GUN CLEANING BRUSH SET
This 3 piece brush set will easily clean clogged spray guns and any other spray equipment.

For Model 100 Cup Gun

ES-10016..........................$ 18.65

For Model 200 Cup Gun

ES-20023..........................$ 24.90

AN210.............$ 7.80

M.E.K.P. DISPENSER
·Accurate measurements.

·2-1/2 to 35 cc graduations.

·Tapered graduate for greater accuracy of

small amounts that are more critical.

·Instantly repeatable.

·Dispensers come with lids to eliminate

evaporation.

·Co-polymer stem for long life.

ES-SGF-025.............$ 5.35

ES-SE-400 4" Spreader....Each.........$ .60

ES-SE-400B100 4" Spreader....Box 100....$ 23.00

ES-SE-500 5" Spreader....Each.........$ .75

ES-RG-150...............$ 11.50

LAMINATE GAUGE
· Easy to read Graduated cylinder.

· Anodized aluminum w/steel lock for repeat measurements.

· Comfortable fit.

· CNC machined accuracy.

· Stainless measuring pin.

· Over 1" of travel/measurements.

ES-SE-600 6" Spreader....Each.........$ .85

46555 1 gal..........$ 5.60

46540 5 gal..........$ 5.60

ES-MXB-075.......$ 477.00

DISCOUNT: LESS 5% IN LOTS OF 10; LESS 10% IN LOTS OF 25

POLYETHYLENE SPREADERS
* Inexpensive, indispensable.
* Use for smoothing, spreading, feathering resin, fillers, putties.
* Flexes with surface contours for an even, smooth spreading surface.
* 100 per tray.

ES-SE-500B100 5" Spreader....Each.........$ 36.40

ES-SE-600B100 6" Spreader....Box 100....$ 44.10

10-35 mil GELCOAT GAUGE
* Solid. Anodized aluminum for long life.
* Use for a variety of FRP product applications.

RUBBER SQUEEGEES
* For spreading resin on large flat surfaces.
* Custom edges to enhance air release.
* 6" and 36" available.

ES-1035......Each............$ 4.10

10" HEAVY DUTY INDUSTRIAL SHEARS
* Inlaid bent trimmer.
* 10" Long, 4-3/4" length of cut.
* Extremely popular for cutting fiberglass

ES-SQG-36 36"....Each....$ 24.75

ES172KE-10....................$ 34.25

12" HEAVY DUTY INDUSTRIAL SHEARS
* Inlaid bent trimmer.
* 12" Long, 6-1/8" length of cut.
* Top quality for long life.

PREVAL SPRAYER
Industry's Disposable Power Sprayer

* Ideal for touch-up painting.
* For touch-ups and repairs on fiberglass and other reinforced plastics.
* Spray your own gelcoat for perfect color matches.
* Use to spray light penetrating oils on control cables in hard to reach areas, especially on aircraft.
* Frees heavy spray equipment.
* Eliminates costly cleanup.
* Spray your own paint for a perfect match.
* Sprays almost any industrial liquid.

ES180KE-12....................$ 43.50

KEVLAR SHEARS
* Serrated blades hold fabic in place for
shearing.
* Specially treated blades for long life.
* New 9.5" model with comfortable nylon
handle and thicker stainless blade.

ES-SCI-KV095................$ 70.00

CANVAS SPRAY HOOD
* Open faced/falcon hood cut.
* Full head-neck paint spray protection.
* Comfortable, breathable, lightweight
cotton.
* One size fits all.
* Individually packaged.

PV465 Sprayer............$ 6.30