2. Pot Life: Approx. 25 minutes @
70°F.
3. Working Time: Approx. 50 minutes from
original mix time to gel @
70°F when spread as a
coating or with a single layer of 10
oz.
Fiberglass Cloth.
4. Performs well in Summer weather due to a
longer working time at higher temps.
5. Excellent wood glue. Can be thickened as
necessary with 701 Cabosil if gap filling of
joints is
required.
6. Can also be used to create a structural putty
to
replace rotted wood. Mix by volume: 1 part
Resin, 3 parts 702 microspheres, 1 part 703
milled fiberglass and add epoxy to make
a putty
consistency. The cured putty can be cut with a
chisel or wood plane to
shape.
7. Excellent laminating resin for covering wood
with fiberglass. Wets out easily & yields
a
slightly flexible laminate
which can withstand
substantial impact
without
cracking.
2.
Pot life: 13 minutes @ 70°F.
3. Working Time: Approx. 25 minutes
@
70°F when spread as a coating or with
10 oz Fiberglass Cloth.
4. Performs well in winter when low shop
temperature is common.
5. Ideal for laminating a glass reinforced shellcoat
over
wood (canoes, kayaks, wood hulls, decks,
architectural structures).
6. Excellent wood glue.
Thicken as necessary with
701
Cabosil if gap filling of joints is required.
7. Excellent chemical and water resistance
(including: skydrol, oil, gasoline).
Excellent
adhesion
to chemically etched
aluminum
or sandblasted
steel.
8. Can also be used to create a structural putty to
replace rotted wood. Mix by volume: 1 part resin,
3 parts 702
microspheres, 1 part 703 milled
fiberglass
and add epoxy to make a putty
consistency. The
cured putty can be cut with a
chisel, or
wood planes to shape.